Skip to content

Dead Pixel Test

Fill your screen with solid colors to find dead, stuck and hot pixels on a monitor, laptop, TV or phone. Runs in your browser; nothing to install.

Pick a color to start, or press Start test to go through all six. Click, tap or press → for the next color, ← to go back and Esc to exit.

How to run a dead pixel test

  1. Clean the screen. Dust and smudges look like dark specks on white. Wipe with a dry microfiber cloth, not paper towel.
  2. Turn off color filters. Night Light on Windows, Night Shift and True Tone on Apple devices, and eye-comfort modes tint white and make color checks harder.
  3. Set brightness high for the white and color screens. For the black screen, darken the room instead.
  4. Start the test and look at each color from normal viewing distance, then closer. Scan in strips: top to bottom, left to right, including the corners under the bezel.
  5. Mark what you find. If you spot a dot, note which colors it shows on. That tells you whether it is dead, stuck or just dust.

Dead, stuck or hot: what the dot means

Each pixel on an LCD or OLED screen is made of three subpixels: red, green and blue. Which colors a faulty dot shows up on tells you which part has failed.

What you seeMost likely causeCan it be fixed?
Black dot on white, red, green and blueDead pixel: no subpixel lights upRarely. Usually a hardware fault.
Red, green or blue dot on black that stays the same colorStuck pixel: one or two subpixels stay onSometimes, with the fixer or by leaving the screen off for a while.
White dot on blackHot pixel: all three subpixels stay onSometimes, same methods as a stuck pixel.
Dark dot on one color only, for example missing on greenDead subpixelRarely.
Blurry dark speck that shifts when you tilt your headDust on or under the surface layerWipe it. If it is under the layer, it is not a pixel fault.

How to try fixing a stuck pixel

Switch to Stuck pixel fixer above, confirm the warning, and drag the flashing square over the stuck pixel. Leave it running for 10 to 20 minutes without looking at it, then check again on black and on the color the pixel was stuck on. If it is still there, run it once more for an hour. Pixels that have been stuck for a long time respond less often.

Some guides suggest pressing on the pixel through a cloth while the screen is on. That can work on LCD panels, but pressing hard can damage more pixels and is risky on OLED and laptop screens, so treat it as a last resort and never press with anything sharp.

Dead pixel policies and returns

A single defective pixel on a new monitor is not always grounds for a warranty replacement. The old ISO 13406-2 standard, which many manufacturers still reference, put panels in classes by how many defects are acceptable. Class II, the most common, allowed up to two always-on pixels, two always-off pixels and five defective subpixels per million pixels. A 4K screen has about 8.3 million pixels, so by that measure a handful of faults could still pass.

Manufacturers now publish their own pixel policies, and some premium lines promise zero bright pixels. Check the policy for your model, and test a new screen the day it arrives: a retailer's return window is usually easier to use than a warranty claim.

Checking for backlight bleed and burn-in

  • Backlight bleed (LCD): on the black screen in a dark room, look for light leaking in from the edges or corners. A faint, even glow that changes as you move your head is normal “IPS glow”; bright patches that stay put are bleed.
  • Burn-in (OLED): on the gray screen, look for faint outlines of things that stay on screen, such as a taskbar, navigation buttons or a channel logo.
  • Uniformity: on gray and white, check for darker corners or tinted areas. Some variation is normal on every panel.

Testing a phone, tablet or TV

On Android, the test goes full screen when you tap Start test. iPhone Safari does not allow web pages to go fully full screen, so the browser bar stays visible: rotate to landscape and run the test twice, scrolling slightly so each edge gets covered. For a smart TV, open this page in the TV's browser, or connect a laptop with HDMI and start the test on the TV screen.

Frequently asked questions

How do I check my screen for dead pixels?

Wipe the screen, turn brightness up, and fill the whole display with one solid color at a time: black, white, red, green and blue. A dead pixel shows as a black dot on every color except black. A stuck pixel shows as a red, green or blue dot that does not change. This test does the color switching for you in full screen.

What is the difference between a dead pixel and a stuck pixel?

A dead pixel gets no power, so it stays black and is easiest to see on a white screen. A stuck pixel has one or more subpixels that stay lit, so it shows as a red, green, blue or mixed-color dot, easiest to see on black. Stuck pixels can sometimes be revived; dead pixels usually cannot.

Does the stuck pixel fixer really work?

Sometimes. Rapidly cycling colors over a stuck pixel forces its subpixels to switch on and off, which can free a liquid crystal that has stopped responding. It works best on pixels that became stuck recently. It cannot repair a dead pixel, a cracked panel or a broken transistor, and no tool can promise a fix.

Is one dead pixel covered by warranty?

It depends on the manufacturer's pixel policy. Many policies only accept a return when a panel has several defective pixels, or a bright pixel in the center of the screen, while some premium monitors promise zero bright pixels. Test a new screen on the day it arrives, because the retailer's return window is often easier to use than the warranty.

Can I run a dead pixel test on a phone or TV?

Yes. Open this page in the phone's browser and start the test; Android browsers go full screen, while iPhone Safari keeps a thin toolbar, so rotate to landscape and check the edges separately. For a TV, open the page in the TV's built-in browser or connect a laptop over HDMI and run the test full screen.

Can dead pixels spread?

A single dead pixel does not spread to its neighbours. If new dead pixels keep appearing, especially in a cluster or a line, the panel or its connector is usually damaged, often by pressure or a drop, and the screen should be checked under warranty.

Related Tools

  • Keyboard Tester — Press keys to see which ones work.
  • PPI Calculator — Work out the pixels per inch of a monitor, laptop, phone or TV from its resolution and size, with dot pitch, physical size and viewing distance.
  • Aspect Ratio Calculator — Get the aspect ratio of any width and height, or resize an image, video or screen without distortion.
  • SEO Title Checker — Check a title tag for length, keyword position and truncation, preview it in desktop and mobile results, and get a 0–100 headline score.
  • Schema Markup Generator — Generate valid JSON-LD structured data for 31 schema types — Article, Product, FAQ, Local Business, Organization, Review and more.
  • SEO Slug Generator — Turn any title or phrase into a clean, SEO-friendly URL slug.